---
title: "Add Management Cards to Pivot Pro+ | Digilock Guide"
slug: "how-to-add-management-cards-to-an-assigned-use-pivot-pro-lock"
description: "Learn how to easily add Management Cards to your assigned use Pivot Pro+ lock with step-by-step instructions. "
updated: 2025-11-10T20:52:55Z
published: 2025-11-10T20:52:55Z
canonical: "support.digilock.com/how-to-add-management-cards-to-an-assigned-use-pivot-pro-lock"
excludeFromSearch: true
---

> ## Documentation Index
> Fetch the complete documentation index at: https://support.digilock.com/llms.txt
> Use this file to discover all available pages before exploring further.

# How to add Management Cards to an Assigned Use Pivot Pro+ lock

These instructions are for Assigned Use Pivot Pro+ locks that have already been set up and no longer have the factory default settings. Management Cards can be programmed to Pivot Pro+ locks at any time. A Programming Card and at least one Management Card will be needed to complete this process.

1. Present hand to lock and hold for 5 seconds. The LED will flash green, then turn red and beep after 5 seconds.

![](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/ppp-basic-hand-door-closed-led-green-5sec-hand-present-rf-tr.png?sv=2026-02-06&spr=https&st=2026-10-29T13%3A54%3A04Z&se=2026-10-29T14%3A54%3A04Z&sr=c&sp=r&sig=pU8PdnMEUJH83fCVwuNQdW7MT1XCPh5evR%2BXOfJ4tTQ%3D)
2. Remove hand. While the LED is flashing green, present the Programming Card. The LED will turn red and beep, followed by flashing green again.

![](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/ppp-basic-prgmcrd-door-closed-led-red-rf-tr.png?sv=2026-02-06&spr=https&st=2026-10-29T13%3A54%3A04Z&se=2026-10-29T14%3A54%3A04Z&sr=c&sp=r&sig=pU8PdnMEUJH83fCVwuNQdW7MT1XCPh5evR%2BXOfJ4tTQ%3D)
3. While the LED is flashing green, present each additional Management Card one at a time. The LED will turn red and beep for each Management Card programmed.

![](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/ppp-basic-mngrcrd-multiple-door-closed-led-red-rf-tr.png?sv=2026-02-06&spr=https&st=2026-10-29T13%3A54%3A04Z&se=2026-10-29T14%3A54%3A04Z&sr=c&sp=r&sig=pU8PdnMEUJH83fCVwuNQdW7MT1XCPh5evR%2BXOfJ4tTQ%3D)
4. Present the Programming Card. The LED will stop flashing, beep twice, then turn red. ![](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/ppp-basic-prgmcrd-door-closed-led-green-rf-tr.png?sv=2026-02-06&spr=https&st=2026-10-29T13%3A54%3A04Z&se=2026-10-29T14%3A54%3A04Z&sr=c&sp=r&sig=pU8PdnMEUJH83fCVwuNQdW7MT1XCPh5evR%2BXOfJ4tTQ%3D)
5. Repeat previous steps for each lock or follow the instructions on [How to Express Register Management Cards to multiple Assigned Use Pivot Pro+ locks](https://support.digilock.com/docs/how-to-express-register-management-cards-to-multiple-assigned-use-pivot-pro-locks) to quickly program multiple locks to operate with the same Management Cards.

Placing your hand near the Pivot Pro+ RFID reader will make **the LED flash green**.

Assigned Use is ideal for personal or dedicated access, where a specific individual or group is given an RFID credential to open a designated unit. The unit remains locked until the assigned user unlocks it using their credential.

Assigned Use Pivot Pro+ units will always have a red LED.

**Shared Use:** The LED will blink red continuously, and the door will not remain locked.

**Assigned Use:** The LED will blink green continuously, and the door will not remain locked.

![D6-PPP-RFID-CARD-MANAGEMENT-00](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/D6-PPP-RFID-CARD-MANAGEMENT-00.png?sv=2026-02-06&spr=https&st=2026-10-29T13%3A54%3A04Z&se=2026-10-29T14%3A54%3A04Z&sr=c&sp=r&sig=pU8PdnMEUJH83fCVwuNQdW7MT1XCPh5evR%2BXOfJ4tTQ%3D)

- Operates Pivot Pro+ locks
- Overrides user access
- Provides management inspection
- Assigns User Credentials (Assigned Use)

![D6-PPP-RFID-CARD-PROGRAMMING-00](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/D6-PPP-RFID-CARD-PROGRAMMING-00.png?sv=2026-02-06&spr=https&st=2026-10-29T13%3A54%3A04Z&se=2026-10-29T14%3A54%3A04Z&sr=c&sp=r&sig=pU8PdnMEUJH83fCVwuNQdW7MT1XCPh5evR%2BXOfJ4tTQ%3D)

Used to program and Express Register Management Cards to a Pivot Pro+ lock.