---
title: "Express Register Management Cards | Pivot Pro+"
slug: "how-to-express-register-management-cards-to-multiple-assigned-use-pivot-pro-locks"
description: "Program multiple assigned use Pivot Pro+ locks with Management Cards using Express Registration mode."
updated: 2025-11-12T15:22:29Z
published: 2025-11-12T15:22:29Z
canonical: "support.digilock.com/how-to-express-register-management-cards-to-multiple-assigned-use-pivot-pro-locks"
excludeFromSearch: true
---

> ## Documentation Index
> Fetch the complete documentation index at: https://support.digilock.com/llms.txt
> Use this file to discover all available pages before exploring further.

# How to Express Register Management Cards to multiple Assigned Use Pivot Pro+ locks

The Programming Card can quickly program multiple Assigned Use Pivot Pro+ locks to operate with the same Management Cards.

1. Go to a lock already programmed to operate with the Management Cards. Present hand to lock and hold for 10 seconds. The LED will flash green, then turn red and beep after 5 seconds. It will continue to flash green, then turn red and beep twice after 10 seconds.

![](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/ppp-basic-hand-door-closed-led-green-10sec-hand-present-rf-tr.png?sv=2026-02-06&spr=https&st=2026-10-29T14%3A47%3A32Z&se=2026-10-29T15%3A47%3A32Z&sr=c&sp=r&sig=hdXLH5gka856hYI%2BbPYIo4sYe8gdbEq%2Fu4yuAM2PC7g%3D)
2. Remove hand. While the LED is flashing green, present the Programming Card. The LED will stop flashing, beep, then turn red.

![](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/ppp-basic-prgmcrd-door-closed-led-green-rf-tr.png?sv=2026-02-06&spr=https&st=2026-10-29T14%3A47%3A32Z&se=2026-10-29T15%3A47%3A32Z&sr=c&sp=r&sig=hdXLH5gka856hYI%2BbPYIo4sYe8gdbEq%2Fu4yuAM2PC7g%3D)
3. Present the Programming Card to program each lock to operate with the same Management Cards. The LED will turn green, beep, then turn red to indicate successful programming.

![](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/ppp-basic-prgmcrd-door-closed-x3-led-red-green-red-rf-tr.png?sv=2026-02-06&spr=https&st=2026-10-29T14%3A47%3A32Z&se=2026-10-29T15%3A47%3A32Z&sr=c&sp=r&sig=hdXLH5gka856hYI%2BbPYIo4sYe8gdbEq%2Fu4yuAM2PC7g%3D)
4. End Express Registration mode.* Go to any programmed lock. Present hand to lock and hold for 5 seconds. The LED will flash green, then turn red and beep after 5 seconds.

![](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/ppp-basic-hand-door-closed-led-green-5sec-hand-present-rf-tr.png?sv=2026-02-06&spr=https&st=2026-10-29T14%3A47%3A32Z&se=2026-10-29T15%3A47%3A32Z&sr=c&sp=r&sig=hdXLH5gka856hYI%2BbPYIo4sYe8gdbEq%2Fu4yuAM2PC7g%3D)
5. Remove hand. While the LED is flashing green, present the Programming Card. The LED will turn red and beep, followed by flashing green again. Once the flashing stops, the Express Registration mode is complete.

![](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/ppp-basic-prgmcrd-door-closed-led-red-rf-tr.png?sv=2026-02-06&spr=https&st=2026-10-29T14%3A47%3A32Z&se=2026-10-29T15%3A47%3A32Z&sr=c&sp=r&sig=hdXLH5gka856hYI%2BbPYIo4sYe8gdbEq%2Fu4yuAM2PC7g%3D)
6. If you're setting up a new site installation, go to [How to assign User Credentials to an Assigned Use Pivot Pro+ lock](https://support.digilock.com/docs/how-to-assign-user-credentials-to-an-assigned-use-pivot-pro-lock).

> [!WARNING]
> *The Programming Card will continue to function in Express Registration mode until it is manually ended.

![D6-PPP-RFID-CARD-PROGRAMMING-00](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/D6-PPP-RFID-CARD-PROGRAMMING-00.png?sv=2026-02-06&spr=https&st=2026-10-29T14%3A47%3A32Z&se=2026-10-29T15%3A47%3A32Z&sr=c&sp=r&sig=hdXLH5gka856hYI%2BbPYIo4sYe8gdbEq%2Fu4yuAM2PC7g%3D)

Used to program and Express Register Management Cards to a Pivot Pro+ lock.

Placing your hand near the Pivot Pro+ RFID reader will make **the LED flash green**.

Assigned Use is ideal for personal or dedicated access, where a specific individual or group is given an RFID credential to open a designated unit. The unit remains locked until the assigned user unlocks it using their credential.

Assigned Use Pivot Pro+ units will always have a red LED.

![D6-PPP-RFID-CARD-MANAGEMENT-00](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/D6-PPP-RFID-CARD-MANAGEMENT-00.png?sv=2026-02-06&spr=https&st=2026-10-29T14%3A47%3A32Z&se=2026-10-29T15%3A47%3A32Z&sr=c&sp=r&sig=hdXLH5gka856hYI%2BbPYIo4sYe8gdbEq%2Fu4yuAM2PC7g%3D)

- Operates Pivot Pro+ locks
- Overrides user access
- Provides management inspection
- Assigns User Credentials (Assigned Use)

Using the Programming Card, multiple locks can be quickly programmed to operate with the same Management Cards.