---
title: "How to Express Register Management Cards to multiple Sh | Digilock Support"
slug: "how-to-express-register-management-cards-to-multiple-shared-use-pivot-pro-locks"
description: "Easily program multiple Pivot Pro+ locks with Management Cards using Express Registration mode for seamless security management."
updated: 2026-06-08T17:50:43Z
published: 2026-06-08T17:50:43Z
canonical: "support.digilock.com/how-to-express-register-management-cards-to-multiple-shared-use-pivot-pro-locks"
excludeFromSearch: true
---

> ## Documentation Index
> Fetch the complete documentation index at: https://support.digilock.com/llms.txt
> Use this file to discover all available pages before exploring further.

# How to Express Register Management Cards to multiple Shared Use Pivot Pro+ locks

The Programming Card can quickly program multiple Pivot Pro+ locks to operate with the same Management Cards.

1. Go to a lock already programmed to operate with the Management Cards. Present hand to lock and hold for 10 seconds. The LED will flash red, then turn green and beep after 5 seconds. It will continue to flash red, then turn green and beep again after 10 seconds.

![](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/ppp-basic-hand-door-closed-led-red-10sec-hand-present-rf-tr.png?sv=2026-02-06&spr=https&st=2026-11-10T16%3A31%3A26Z&se=2026-11-10T17%3A31%3A26Z&sr=c&sp=r&sig=WtvfwkAVXCenfrH7078ZDAm1POOCFtHvZqqcBNE%2BO8U%3D)
2. Remove hand. The LED will turn green and beep, then start flashing red. While the LED is flashing red, present the Programming Card. The LED will turn green and beep.

![](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/ppp-basic-prgmcrd-door-closed-led-green-rf-tr.png?sv=2026-02-06&spr=https&st=2026-11-10T16%3A31%3A26Z&se=2026-11-10T17%3A31%3A26Z&sr=c&sp=r&sig=WtvfwkAVXCenfrH7078ZDAm1POOCFtHvZqqcBNE%2BO8U%3D)
3. Present the Programming Card to program each lock to operate with the same Management Cards. The LED will turn green and beep to indicate successful programming.

![](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/ppp-basic-prgmcrd-door-closed-x3-led-green-red-rf-tr.png?sv=2026-02-06&spr=https&st=2026-11-10T16%3A31%3A26Z&se=2026-11-10T17%3A31%3A26Z&sr=c&sp=r&sig=WtvfwkAVXCenfrH7078ZDAm1POOCFtHvZqqcBNE%2BO8U%3D)
4. End Express Registration mode.* Go to any programmed lock. Present hand to lock and hold for 5 seconds. The LED will flash red, then turn green and beep after 5 seconds.

![](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/ppp-basic-hand-door-closed-led-red-5sec-hand-present-rf-tr.png?sv=2026-02-06&spr=https&st=2026-11-10T16%3A31%3A26Z&se=2026-11-10T17%3A31%3A26Z&sr=c&sp=r&sig=WtvfwkAVXCenfrH7078ZDAm1POOCFtHvZqqcBNE%2BO8U%3D)
5. Remove hand. While the LED is flashing red, present the Programming Card. The LED will turn green and beep, followed by flashing red again. Once the flashing stops, the Express Registration mode is complete.

![](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/ppp-basic-prgmcrd-door-closed-led-green-rf-tr.png?sv=2026-02-06&spr=https&st=2026-11-10T16%3A31%3A26Z&se=2026-11-10T17%3A31%3A26Z&sr=c&sp=r&sig=WtvfwkAVXCenfrH7078ZDAm1POOCFtHvZqqcBNE%2BO8U%3D)
6. If you're setting up a new site installation, then after completing these steps, Shared Use Pivot Pro+ locks are ready for use. For operating instructions, go to [How to operate a Pivot Pro+ lock in Shared Use](https://digilock.us.document360.io/docs/how-to-operate-a-pivot-pro-lock-in-shared-use).

> [!WARNING]
> *The Programming Card will continue to function in Express Registration mode until it is manually ended.

![D6-PPP-RFID-CARD-PROGRAMMING-00](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/D6-PPP-RFID-CARD-PROGRAMMING-00.png?sv=2026-02-06&spr=https&st=2026-11-10T16%3A31%3A26Z&se=2026-11-10T17%3A31%3A26Z&sr=c&sp=r&sig=WtvfwkAVXCenfrH7078ZDAm1POOCFtHvZqqcBNE%2BO8U%3D)

Used to program and Express Register Management Cards to a Pivot Pro+ lock.

![D6-PPP-RFID-CARD-MANAGEMENT-00](https://cdn.us.document360.io/43e2fe2d-295f-490f-80b5-6c5ccfc382bb/Images/Documentation/D6-PPP-RFID-CARD-MANAGEMENT-00.png?sv=2026-02-06&spr=https&st=2026-11-10T16%3A31%3A26Z&se=2026-11-10T17%3A31%3A26Z&sr=c&sp=r&sig=WtvfwkAVXCenfrH7078ZDAm1POOCFtHvZqqcBNE%2BO8U%3D)

- Operates Pivot Pro+ locks
- Overrides user access
- Provides management inspection
- Assigns User Credentials (Assigned Use)

Using the Programming Card, multiple locks can be quickly programmed to operate with the same Management Cards.

Placing your hand near the Pivot Pro+ RFID reader will make **the LED flash red**.

Shared Use is perfect for environments where multiple users need temporary access. An RFID credential allows anyone to occupy the unit, and once unlocked and vacated, it's available for the next user.

Shared Use Pivot Pro+ units are available when the LED is green, and occupied when the LED is red.