Locks are shipped with factory default settings (operate by pressing "C Button+Key Button" for keypad or by presenting your hand to the lock for RFID). Each lock must be set up to operate with a Programming Key and Manager Key(s). If the programming needs to be erased at any time, the locks can be set back to factory default with a Reset Key. This key is used as a management support tool, and should be kept in a secure place when not in use. In the event that the key is lost or stolen, it is designed to expire 3 weeks from the ship date. Once the key expires, it can no longer be used.
Resetting a Deadbolt or Deadlatch lock
The images shown are for illustration purposes only and may not be an exact representation of your product.
Identify locks to be reset and insert the Reset Key into the key slot. A two-tone beep will be heard and the LED will flash.
Repeat Step 1 with each lock needing to be reset. If you hear a single beep, reinsert the key until you hear a two-tone beep and see the LED flash.
To test if the lock is at factory default, press "C Button+Key Button". The deadbolt/deadlatch will throw to the locked or unlocked position.
Once the locks are at factory default, they are not secure and should be programmed as soon as possible. Please reference the How to set up a keypad lock for programming instructions.
The images shown are for illustration purposes only and may not be an exact representation of your product.
Identify locks to be reset and insert the Reset Key into the key slot. A two-tone beep will be heard and the LED flash.
Repeat Step 1 with each lock needing to be reset. If you hear a single beep, reinsert the key until you hear a two-tone beep and see the LED flash.
To test that the lock is at factory default, present hand to lock. The deadbolt/deadlatch will throw to the locked or unlocked position.
Once the locks are at factory default, they are not secure and should be programmed as soon as possible. Please reference the How to set up an RFID lock for programming instructions.
Resetting a Cam lock
NOTE: The example locks shown below are in the locked position.
The images shown are for illustration purposes only and may not be an exact representation of your product.
Identify locks to be reset and insert the Reset Key into the key slot. A two-tone beep will be heard and the LED will flash.
Repeat Step 1 with each lock needing to be reset. If you hear a single beep, reinsert the key until you hear a two-tone beep and see the LED flash.
To test if the lock is at factory default, press "C Button+Key Button". The lock should engage to allow the knob to be turned to the locked or unlocked position.
Once the locks are at factory default, they are not secure and should be programmed as soon as possible. Please reference the How to set up a keypad lock for programming instructions.
The images shown are for illustration purposes only and may not be an exact representation of your product.
Identify locks to be reset and insert the Reset Key into the key slot. A two-tone beep will be heard and the LED will flash.
Repeat Step 1 with each lock needing to be reset. If you hear a single beep, reinsert the key until you hear a two-tone beep and see the LED flash.
To test that the lock is at factory default, present hand to the lock. The lock should engage to allow the knob to be turned to the locked or unlocked position.
Once the locks are at factory default, they are not secure and should be programmed as soon as possible. Please reference the How to set up an RFID lock for programming instructions.
