These instructions are for Pivot Pro+ locks that have already been set up and no longer have the factory default settings. Management Cards can be programmed to Pivot Pro+ locks at any time. A Programming Card and at least one Management Card will be needed to complete this process.
Present hand to lock and hold for 5 seconds. The LED will flash red, then turn green and beep after 5 seconds.
Remove hand. While the LED is flashing red, present the Programming Card. The LED will turn green and beep, followed by flashing red again.
While the LED is flashing red, present each additional Management Card one at a time. The LED will turn green and beep for each Management Card programmed.
Present the Programming Card. The LED will turn green and beep twice.
Repeat previous steps for each lock or follow the instructions on How to Express Register Management Cards to multiple Pivot Pro+ lock to quickly program multiple locks to operate with the same Management Cards.
