These instructions are for Assigned Use Pivot Pro+ locks that have already been set up and no longer have the factory default settings. Management Cards can be programmed to Pivot Pro+ locks at any time. A Programming Card and at least one Management Card will be needed to complete this process.
Present hand to lock and hold for 5 seconds. The LED will flash green, then turn red and beep after 5 seconds.
Remove hand. While the LED is flashing green, present the Programming Card. The LED will turn red and beep, followed by flashing green again.
While the LED is flashing green, present each additional Management Card one at a time. The LED will turn red and beep for each Management Card programmed.
Present the Programming Card. The LED will stop flashing, beep twice, then turn red.
Repeat previous steps for each lock or follow the instructions on How to Express Register Management Cards to multiple Assigned Use Pivot Pro+ locks to quickly program multiple locks to operate with the same Management Cards.
