All Pivot Pro+ locks are shipped with {{glossary.factory default - Pivot Pro Plus}} settings. To program the Pivot Pro+ locks and prepare them for use, they must be set up to operate with a {{glossary.Programming Card}} and {{glossary.Management Card}}(s). A Programming Card and at least one Management Card will be needed to complete this process.

With the door open, present the Programming Card to the RFID reader. The lock will initialize, the LED will turn green and beep, then flash red.
While the LED is flashing red, present each Management Card one at a time. The LED will turn green and beep for each Management Card programmed.

NOTE: If the LED stops flashing red and there are still more Management Cards to add, follow the How to Add Management Cards to a Pivot Pro+ lock instructions.

Present the Programming Card. The LED will turn green and beep twice. Close the door. The LED will flash red, then turn green.
Repeat previous steps for each lock or follow the How to Express Register Management Cards to multiple Pivot Pro+ lock instructions to set up all locks.
After completing these steps, Pivot Pro+ locks are ready for use. For operating instructions, go to How to operate a Pivot Pro+ lock in Shared Use.

How to check if a Pivot Pro+ lock is set to factory default