About Digilock Pivot Pro+

Quick Start

Shared Use

How to check if a Shared Use Pivot Pro+ lock is set to factory default
How to set up a Shared Use Pivot Pro+ lock
How to add Management Cards to a Shared Use Pivot Pro+ lock
How to Express Register Management Cards to multiple Share Use Pivot Pro+ locks
How to Replace the Programming Card and Management Cards on a Shared Use Pivot Pro+ lock

Assigned Use

How to check if an Assigned Use Pivot Pro+ lock is set to factory default
How to set up an Assigned Use Pivot Pro+ lock
How to add Management Cards to an Assigned Use Pivot Pro+ lock
How to Express Register Management Cards to multiple Assigned Use Pivot Pro+ locks
How to replace the Programming Card and Management Cards on an Assigned Use Pivot Pro+ lock
How to assign User Credentials to an Assigned Use Pivot Pro+ lock
How to Express Register Management Cards and User Credentials to multiple Assigned Use Pivot Pro+ locks
How to remove User Credentials from an Assigned Use Pivot Pro+ lock

Operating Locks

Shared Use

How to operate a Pivot Pro+ lock in Shared Use

Assigned Use

How to operate a Pivot Pro+ lock in Assigned Use

Managing Locks

Shared Use

How to override a Pivot Pro+ lock in Shared Use

Assigned Use

How to override a Pivot Pro+ lock in Assigned Use

Troubleshooting

Does not unlock with the User Credential
Does not override with a Management Card
Does not recognize the Programming Card
No LED response when hand is presented to the lock

Placing your hand near the Pivot Pro+ RFID reader will cause the LED to flash red.

Shared Use is perfect for environments where multiple users need temporary access. An RFID credential allows anyone to occupy the unit, and once unlocked and vacated, it's available for the next user.

Shared Use Pivot Pro+ units are available when the LED is green, and occupied when the LED is red.

Placing your hand near the Pivot Pro+ RFID reader will cause the LED to flash green.

Assigned Use is ideal for personal or dedicated access, where a specific individual or group is given an RFID credential to open a designated unit. The unit remains locked until the assigned user unlocks it using their credential.

Assigned Use Pivot Pro+ units will always have a red LED.